C501  

Magnesite Bricks and Shapes and/ or Ramming Mass, Castables and Mortars

1000 Kgs

1

Major Raw Materials Comprising of :
a) Dead Burnt Magnesite (Magnesium Oxide 92% & above) and/ or i) Sea Water magnesia (Magnesium Oxide 94% and above) and/ or ii) Fused Magnesia (Magnesium Oxide 94%and above)

1040 Kgs

2

Additives comprising of :
a) Phenolic Resins and/ or
i)Ligno Sulphate and/ or
ii)Pitch Coke/ Tar Pitch

40 Kgs

3

Misc. Items:
a) Mould and Mould Liners
b)Cutting Tools

Upto 10% of CIF value.

Note 1. In the case of export of Ramming Mass, Castables & Mortars, item at (a), (b) in item No. 3 should not be allowed.

C502

Magnesite Chrome/ Magnesia Co-clinker Bricks and Shapes and/ or Ramming Mass, Castables and Mortars

1000 kgs.

1

a)

Major Raw Materials comprising of: i)Dead Burnt Magnesite (Magnesium Oxide 92% & above) and/ or ii)Sea Water Magnesia (Magnesium Oxide 92% and above) and/ or iii) Chromite (Chromium Oxide 40% Minimum)

700 kgs

b)

Mag Chrome Co-clinker and/ or
i) Magnesium aluminium Co-clinker or Magnesia Lime Co-clinker (Magnesium Oxide 40% minimum)

350 kgs

2

Additives comprising of:

a)

Micro Fine Chrome Bond and/ or

50 kgs

b)

Mettalic Alloy of Aluminium, Silicon, Magnesium

3

Misc. Items:

a)

Mould and Mould Liners

Upto 10% of CIF value.

b)

Cutting Tools

Note 1. In the case of export of Ramming Mass, Castables & Mortars, item at (a), (b) in item No. 3 should not be allowed.

C503

Magnesium Ferro Silicon

1000 kgs

1

Ferro Silicon

885 kgs.

2

Magnesium Metal

100 kgs.

3

Ferro Silicon Calcium

50 kgs.

4

Misch Metal (containing rare earths : 98% minimum)

25 kgs.

Note: For import item No.4 prior permission from the Deptt.of Atomic Energy shall be obtained and submitted by the applicant alongwith the application for advance licence/ DFRC.

C504

Non Alloy/ Alloy Steel Coated/ Plated Wires

1000 kg

1

Wire rod of relevant grade of Steel
OR

1.03 kg/ kg content in the export product.

1

a)

Billets/ Blooms of relevant grade of steel

1.06 kg/ kg content in the export product.

b)

CI/ Steel Rolls/ Tungsten Carbide Rings/ Rolls for Rolling Mill

0.62 kg

c)

Furnace Oil for captive oil fired re-heating Furnace

30 kg

2

Dry Drawing Lubricant/ Coating

8 kg

3

Tungsten Carbide dies

5 Nos.

4

Wet Drawing Lubricant

4 kg..

5

Plastic/ Steel Bobbins/ Spools

Net to net.

6

Relevant Metal for coating/ Plating

45 kg

7

Lead (for Patenting)

3 kg

Note: Import of items at Sl. No.4 shall be allowed against export of wet drawn steel wires of size below 1.6mm only.

C505

Hot Rolled Galvanized Non alloy steel Sheet/ hoops & Strips/ Wide Coils

1 kg

1

Non alloy hot rolled Steel Sheets/ Coils

1.05 kg

2

Zinc

0.04 kg

C506

Non alloy steel Galvanised wire

1000 kgs

1

a)

Copper scrap/ Ingots (if copper is present in the export product)

0.04 kg

b)

Zinc

40 kgs

c)

Lead

3.3 kgs

d)

i)Furnace Oil (only for units with captive power plants)

30 kgs

ii)Lubricant (only for units with captive power plant)

0.65 kg

1

e)

i)Furnace oil for oil fired reheating furnace in rolling mill

50 kgs

ii) Furnace oil for ladle heating

6 kgs

1

f)

Cored wire of lead/ lead shots (in case of export of lead bearing free cutting steel sheet only)

2.5 kgs

2

MAJOR INPUTS :

a)

Non Alloy steel Melting scrap/ Direct Reduced Iron (HBI/ Sponge Iron)

360 kgs

b)

Low Silica Lime Stone

218 kgs

c)

Metallurgical Coke

610 kgs

3

i)ADDITIVES

a)

Cored wires/ lumps/ powder

1 kg

of Calcium Silicide (CaSi)

b)

Silico Manganese
OR

16 kgs

i) Ferro Silicon

6 kgs

ii) Ferro manganese

10 kgs

c)

Raw Petroleum coke

5 kgs

d)

Cored wires/ scrap/ ingots/ shots of aluminium

1 kg

ii)MISC. ITEMS:

a)Graphite Electrode

6 kgs

b)Rolls/ Tungsten Carbide rings for rolling mill

1.77 kgs

c)Copper lined mould/ Copper mould for casting

0.013 kgs

d)Saw/ Shear Blade

0.01 kg

e)Ceramic coated lancing pipe

0.25 No.

f)Temperature Tips/ Celox inserts

0.05 No.

g)Sampler tips

0.05 No.

h)Submerged tuyers/ Oxygen lance pipe / Oxygen Super Sonic lance / tip.

0.77 kgs

i)Atmospheric injector

4 kgs

j)Casting Powder

2 kgs

k) Silica Texture bellow Shroud

0.0052 kg

iii)WIRE DRAWING MISC. ITEMS:

a)Dry drawing lubricant

8 kgs

b)Wire drawing soap

7 kgs

c)Wet drawing lubricant

4 kgs

d)Tungesten carbide dies

5 Nos.

e)Plastic bobbins/ spools

300 Nos.

iv)REFRACTORY ITEMS:

10 Kg

a)Runner Mass/ castable for Mini Blast Furnace (MBF)

b)Graphite Carbon refractories for Mini Blast Furnace (MBF)

c)Magnesia reagent/ Desulphurisation compound

d)Zirconia / Magnesia Nozzles

e)Aluminium Graphite Nozzles/ Monobloc Stopers/ Stoper heads/ Stoper Rods/ Shrouds

f)Porous Plugs/ seat Blocks/ Sleeves/ Slide Gate Plates

g)Direct Bonded basic Bricks

h)EBT Tube/ Mass/ Bricks

i)Monolithic/ Gunning/ Ramming Mass/ Castables

j)Dolomite Magnesia Carbon Bricks

Note 1. The above norms is applicable only if the export product(s) is/ are manufactured through Mini Blast Furnace-Electric Arc Furnace route using liquid hot metal as the principal raw material in Electric Arc Furnace.
2. Import of item atSl.No.3 (iii) (c), (d) and (e) shall be allowed against export of wire of size below 1 mm dia only.Import of Directo Reduced Iron shall be limited to 10% of total metallic input of 360Kg. Mentioned at item 2(a).

C507

Non alloy steel Galvanised Wires (From melting scrap)

1000 kgs

1

Major Inputs comprising of:

a)

Non Alloy Steel Melting Scrap

1200 Kgs

b)

Low Silica Lime Stone

95 kgs

2

Additives comprising of :

a)

Cored Wires/ Lumps/ Powder of Calcium Silicide (CaSi)

b)

Silico Manganese
Or
(i) Ferro silicon
(ii) Ferro manganese

c)

Raw Petroleum Coke

22.46 kgs

d)

Cored wires/ Scrap/ Ingots/ Shots of aluminium

e)

Copper scrap/ Copper Cathode/ Copper wire Bar/ Copper Rod (If copper is actually present in export product)

0.04 kgs

f)

Cored Wires of lead/ Lead Shots.(in case of export of lead bearing free cutting steel only)

2.5 kg

3

Miscellaneous Items:

a)

Graphite Electrode

b)

Rolls/ Tungsten Carbide Rings for Rolling mill

c)

Copper lined moulds for casting

20 kg

d)

Saw/ Shear Blade

e)

Ceramic coated lancing pipe

f)

Temperature Tips

g)

Sampler Tips

h)

Refractory items, comprising of:

1) Zirconia/ Magnesia Nozzles

2) Aluminium-Graphite Nozzles/ Monoblock Stoppers/ Stopper head/ Stopper Rods/ Shrouds

3) Porous Plugs/ Seat Blocks/ Sleeves/ Slide Gate Plates

4) Direct Bonded basic Bricks

5) EBT Tube/ Mass/ Bricks

6) Monolithic/ Gunning/ Ramming Mass/ Castables

7) Dolomite Magnesia Carbon Bricks

8) Ladle inner Nozzles/ collector Nozzles

3

i)

Casting Powder

4

Wire drawing and galvanising Misc. Items:

a)

Dry drawing lubricants

b)

Wire drawing soft

c)

Wet drawing lubricants

37.7 kgs

d)

Tungston carbide dies

e)

Plastic bobbins/ Spools

f)

Zinc

40 kgs

g)

Lead

3.3 kgs

5

Energy sources comprising of:

a)

(i) Furnace Oil (only for Units with captive power Plant)

70 kgs

a)

(ii) Lubricant (only for units with captive power Plant)

0.65 kgs.

5

b)

(i) Furnace oil for oil-fired Reheating Furnace in Rolling Mill.

50 kgs

b)

(ii) Furnace oil for Ladle heating

6 kgs.

1. The above norms is applicable only if the export product(s) is/ are manfactured through Electric arc furnace/ Induction furnace route using steel melting scrap as basic raw material.
2. In case the product is manufactured through induction furnace route, the item at Sl.No 3(a) shall not be allowed.
3. Import of item at Sl.No 4(c)(d)(e) shall be allowed against of export of wire below 1mm dia only.
4. The item Non Alloy Steel Melting Scrap will be allowed as per the definition given in Section XV of Customs Tariff.

C508

Hot Rolled Non Alloy Steel Plates/ Sheets / hoops & Strips. (including skelp)/ wide Coils through DC arc Furnace Route (for open Cycle Operation).

1000 kgs

1

a)

Copper Scrap/ Copper Cathode/ Copper Wire Bar/ Copper Rod (if copper is present in the export product)

0.04 kg

b)

Energy Sources/ Fuels (Natural Gas/ LNG, NGL (Condensate/ gaseous), Naptha, HSD Oil, Furnace Oil) (only for plants having captive power plant with facilities installed for use of specific energy sources/ fuel)

2626330K. Cal

c)

Energy Sources/ Fuels (Natural Gas/ LNG,NGL (condensate/ gaseous), Naptha, High Speed Diesel Oil, Light Diesel Oil, Furnace Oil)(for re-heating furnace in rolling mills, ladle heating and tundish pre-heating)

565670 K Cal.

NGL for re-heating furnaces in rolling mills, ladle heating and tundish pre-heating (only for plants having facilities installed for the use of this fuel)

56 kgs

2

MAJOR INPUTS :

a)Non-Alloy Steel Melting Scrap/ Direct reduced iron (sponge iron/ Hot Brequitted Iron)/ Pig Iron

1111 Kgs.

b)Lime Stone

200 kgs

3

i)ADDITIVES :

a)Cored wires/ lumps/ powder of Calcium Silicide (CaSi)

1 kg

b)Silico Manganese
OR

13 kgs

i)Ferro Silicon

3 kgs

ii)Ferro Manganese

10 kgs

c)Raw Petroleum Coke / Calcined Petroleum Coke/ Metallurigical Coke/ Coke Breeze

5 kgs

d)Cored Wires/ Scrap/ Ingots/ Shots of Aluminium

1 kg

e)Dolomite

40 kgs

f)Ferro Titanium/ Ferro Vanadium/ Ferro Phosphorous/ Ferro Aluminium/ Ferro Chrome/ Ferro Boron/ Ferro Niobium(if these are actually present in the export product)

3 kgs

3

ii)MISC. ITEMS:

a)Graphite Electrode

4 kgs

b)Rolls for Rolling Mill

1.2 kgs

c)Copper lined Moulds for casting

0.013 kg

d)Saw/ Shear Blade

0.1 kg

e)Ceramic coated lancing pipe

0.02 No.

f)Temperature Tips

0.1 No.

g)Sampler Tips

0.5 No.

h)Casting Powder

2 kgs

i)Fluorspar/ Mould Flux

1.5 kgs

j)Oxygen/ Sampler probes

0.002 No.

k)Rolls for Caster

0.5 kg

l)Hydraulic Oil/ Lubricating Oil

1.7 kgs

m)Transformer Oil

0.59 kg

3

iii)REFRACTORIES :

a)Zirconia / Magnesia Nozzles

b)Aluminium Graphite Nozzles/ Monobloc Stopers/ Stoper heads/ Stoper Rods/ Shrouds

c)Porous Plugs/ seat Blocks/ Sleeves/ Slide Gate Plates

d)Direct Bonded basic Bricks

e)EBT Tube/ Mass/ Bricks

f)Monolithic/ Gunning/ Ramming Mass/ Castable

g)Dolomite Magnesia Carbon Bricks

25.8 kgs

h)Ladle inner Nozzles/ collector Nozzles/ Nozzle filling Mass/ Refractory Nozzles

i)Reheating Furnace Refractories

j)Black Refractories

k)Roof Refractories

l)Tundish Refractories

m)Tundish Gunning Mass

n)Tundish Powder

o)Purging Refractories

Note 1.This norm is applicable for export product manufactured through DC Electric Arc Furnace Route for open cycle operation.
Note 2. Items at Sl.No. 3(i) (f) i.e. Ferro-Titanium/ Ferro Phosphorous/ Ferro Chrom/ Ferro Boron/ Ferro Niobium will be allowed if these are actually present in the export product.
Note: 3 Import of either one or a combination of the energy sources / fuels mentioned against Sr. Nos. 1 (ii) & 1 (iii) shall be permitted within the overall calorific value , subject to further actual user condition.
Note : 4 Quantity of specific fuel (s) in kgs/ Cubic meter/ K.ltr shall be obtained by dividing the K.Cal figure by the net calorific value/ heal value of the fuel (s) detailed below:-Net Caloric values of fuels
1. Natural Gas -8400K.Cal/ Cubic Mtr.
2. LNG-11436K.Cal/ Kg
3. Naptha-10610K.Cal/ Kg
4. NGL-10610K.Cal/ Kg
5. LDO-10060K.Cal/ Kg
6. F.O.-9790K.Cal/ Kg
7. HSD-10230K.Cal/ Kg
Note: 5. These norms are not applicable to DFRC Scheme as per General Note No. 7 in Standard Input Output Norms Book
Note : 6 Import of Direct Reduced Iron shall be allowed up to 90% of the total metallic input of 1111 kgs
Note : 7 Import of Pig Iron may be allowed upto 10% of the total metallic input of 1111 kgs.

C509

Non alloy Steel Plates

1 kg

1

Non alloy Steel Slabs

1.10 kg

C510

Non Alloy/ Alloy Steel (Excluding Stainless Steel) Wires (Uncoated)

1000 kgs

1

Wire rod of relevant grade of steel

1030 kgs

2

Dry Drawing Lubricant/ Coating

8 Kgs

3

Tungsten Carbide Dies

5 Nos.

4

Wet Drawing Lubricant

4 kg.

5

Plastic/ Steel Bobbins/ Spools

Net to net.

Note: Import of Items at Sl.No. 4 shall be allowed against export of wet drawn steel wires of size below 1.6mm only.

C511

Non alloy/ Alloy/ stainless steel Bars and Rods (including Rounds, flats, Hexagon, octoagon, wire rod, cold twisted deformed bars, thermo-mechanically treated reinforcing Bars etc.) Angles, Shapes and Sections (including Beams, Joists,Channels Special Profiles etc. ) Plates/ sheets/ strips/ wide coils/ Blooms/ Billets/ Slabs and Ingots

1000 Kgs

1

Calibrated Iron Ore with 65% and more Iron content

(a) 690 Kg for stainless steel (b) 1250 Kg for other steel

2

Non alloy steel melting scrap

(a) 200 Kg for stainless steel (b) 360 Kg for other steel

3

Liquefied Petroleum Gas

76 Kgs

4

Reformer catalyst

0.06 Lts

5

Briquetting moulds

0.0006 Nos

6

Non coking coal (with ash content less than 12%)

850 Kgs

7

Graphite Electrode

6 Kgs

8

Cored wire/ lumps/ powder of calcium silicide (CaSi)

1Kg

9

Rolls/ Tungston Carbide rings for rolling mills

1.77 Kgs

10

Copper Mould

0.0007 Nos

11

Silico Manganese
OR

(Qty. in Kgs as in formula 1 of note 7)

11

a)

Ferro Silicon

(Qty. in Kgs as in formula 2 of note 7)

b)

Ferro Manganese

(Qty. in Kgs as in formula 3 of note 7)

12

Refractory comprising of : a) Zirconia/ magnesia nozzles

(i)10 Kgs for non alloy steel

b)

Aluminium Graphite nozzles/ monoblock stoppers/ stopper heads/ stopper rods/ shrouds

(ii)25 Kgs for stainless steel

c)

Porous plugs/ seat blocks/ sleeves/ slidegate plates

(iii)15 Kgs for alloy steel other than stainless steel

d)

Direct bonded basic bricks

e)

EBT tubes/ Mass/ Bricks

f)

Monolithic/ gunning/ ramming mass/ castables

g)

Dolomite/ magnesia carbonbricks

13

Other Ferro alloys including nickel oxide, sinter, ferro nickel, charge chrome provided the alloying element(s) is/ are actually present in the export product.

(Qty. in kgs. as in formula 4 of Note 7 below)

14

Casting Powder

2 Kgs

15

Saw/ Shear blade

0.01 Kgs

16

Copper scrap/ Copper Cathode/ Copper Wire Bar/ Copper Rod (if copper is actually present in the steel)

0.04 Kgs

17

Furnace oil (for captive power plant)

70 Kgs

18

Furnace oil for oil fired reheating furnace in the rolling mill

50 Kgs

19

Furnace oil for ladle heating

6 Kgs

20

Lubricant/ Gear oil (for captive power plant)

0.65 Kgs

21

Low silica Lime Stone

100 Kgs

22

Cored wire/ scrap/ ingot of aluminium

1 Kg

23

Cored wire of lead/ lead shots (in case of export of lead bearing steel only)

2.5 Kgs

24

Raw Petroleum Coke

5.0 Kgs

25

Ceramic coated lancing pipe

1 Nos

26

Temperature Tips

0.5 Nos

27

Sampler Tips

0.25 Nos

1. The item Non Alloy Steel Melting Scrap will be allowed as per the definition given in Section XV of Customs Tariff.2. The above norms are applicable only if the export product(s) is manufactured through Gas/ Coal based sponge iron-Electric Arc Furnace/ Induction Furnace route using iron ore as the basic raw material
3.The item at Sl. No.(6) would not be allowed If export product(s) are manufactured through gas based sponge iron route and the items at Sr. No.(3) (4) & (5) would not be allowed if export product(s) are manufactured through coal based sponge iron route
4. In case of export product(s) manufactured through induction furnace route, the item at Sr.No.(7)will not be allowed.5. In case of continuous cast billtes/ blooms/ slabs produced through continuous casting route, rolling mill rolls and Tungsten carbiderolls, item at Sl.No.(9) will not be allowed. Similarly, against export of rolled blooms, billets, slabs, refractories item at Sl.No. 12(a)(b)(c) shall not be allowed, however, in case of export of rolled produced out of continuous blooms item mentioned above i.e. rolls/ Tunsten rings and refractories shall be allowed.
Import of item at Sr.No. (9)(10)(12)(a)(b)(14)(15)&(18) shall not be permitted against export of ingots.7)Formula:1) 5.5 x (mean average of % silicon content in Steel)(mean average of Manganese content in Steel)

C512

Non Alloy/ Alloy/ Stainless Steel Bars & Rods (including Rounds, Flats, Hex- agons, Octagons, Wire rods, Cold twisted deformed bars, thermo mechnically treated reinforcing Bars) Angles, Shapes and Sections (including beams, Joists, Channels, special profiles), Plates Sheets/ Strips/ wide Coils, Blooms, Billets, Slabs, Ingots, wires, pipes and tubes, Skelp, Rails and Sleeper

1000 kgs

1

i)Copper Cathode/ Copper Wire Bar/ Copper Rods (if copper is present in the export product)

0.04 kg

ii)Copper Plates/ Micro alloyed copper plate (for use in copper lined casting moulds)

0.1 kg

iii)Furnace Oil/ LSHS/ Naptha

13 kgs

2

MAJOR INPUTS:

i)Non-Alloy Steel Melting Scrap

330 kgs

ii)Pig Iron

31.774 kgs

iii)Low silica lime Stone

620 kgs

iv)Coking Coal
OR
Low Ash Metallurgical Coke (LAM Coke)

1000 kgs, 700Kgs.

Metallurgical Coke

700 kgs

3

i)ADDITIVES:

a)

Cored wires/ scraps/ shots/ ingots of aluminium

1.466 kgs

b)

Ferro Niobium

0.035 kg

c)

Ferro Vanadium

0.004 kg

d)

Ferro Silicon/ Ferro Manganese/ Silico Manganese/ Other ferro Alloy(s) (including Nickel Oxide Sinter/ Ferro Nickel/ Charge chrome provided the alloying elements is/ are actually present in the export product.

17.00 kgs

e)

Calcium Silicide (CaSi)

1.5 kg

f)Raw Petroleum Coke

2.3 kgs

3

ii) MISC.ITEMS:

a)Silicon Carbide Grains

2.0 kgs

b)Rolls/ Tungsten Carbide rings for Rolling Mill

1.77 kgs

c)Celox Inserts/ Oxygen measuring probes

0.004 kg

d)Thermodynamic elements

0.325 kg

e)Magnesia Reagent/ Desulphurisation Compound

0.006 kg

f)Silica Gel/ Mobile Sorbead

0.010 kg

g)Freon Gas-142/ 114(Net of Cylinders)

0.010 kg

h)Stainless steel Hoses

0.007 kg

i) shear Blades/ Saw Blades

0.010 kg

j) Oxygen Lance pipes

0.750 kg

k)Rolling Mill Oil

0.500 kg

l)Casting Powder

2.083 kg

m)Temperature Tips

0.022 kg

n)Canned Elements/ Pearmeable elements for combined blowing

0.200 kg

o)Graphite electrodes (only those having VADR facilities)

1.000 kg

p)Welding flux

8.0 kgs

q)Weld wire

4.0 kgs

r)Surface protection film

13.3 kgs

s)Copper lined mould for casting

0.013 kg

t) Refractory Bricks/ Shapes and/ or Dead Burnt/ Sea Water/ Fused Magnesia for Captive use for manufacture of Bricks/ Shapes

9 kgs

u) Monolithic Refractory viz. Castable, Gumming Mass & Ramming Mass and/ or Dead Burnt/ Sea Water/ Fused Magnesia for captive use for manufacture of Monolithic Refractory

5 kgs

v) Special Refractories namely, Continuous Cast refractories (such as Shrouds, Mono Block Stoppers and Sub-entry Nozzles), Slide Gate refractories, Porous Plug Zircon/ Zirconia Nozzles and Tundish Nozzles

1 kg

Note 1.The above norm is applicable only if the export product(s) is manufactured through Blast Furnace-LD Converter/ Open Hearth/ Energy Optimising Furnace routes in the integrated steel plants.
2. Ferro Niobium and Ferro vanadium would be permitted only if the alloying element namely Niobium and Vanadium is present in the export product.
3. Item of import at Sl.No.1 (ii), 3(ii)(b)(i)(l) (p) (q)(s) and continuous cast refractories and Tundish Nozzles at (v) shall not allowed in case of export of Steel ingots.
4. Item of import at Sl.No.1 (ii), 3(ii), (c), (m) & 3 (iii) (a), (b), shall not be allowed in case of rolled blooms/ billets/ slabs. However, against export of rolled billets made through continuous cast blooms, continuous cast refractories & Tundish Nozzles under 3(ii)(v) shall be allowed.
5. Item of import at Sl.No.3 (ii) (p) and (q) shall be allowed in case of export of pipes and tubes only. The item of import at Sl. No 3 (ii) (r) shall be allowed in case of export of CRGO/ CRNGO sheets.
6.The item NonAlloy Steel Melting Scrap will be allowed as per the definition given in section XV of Customs Tariff.
7. Th7. The item at Sl. No. 3 (ii)(s) shall not be allowed in case of import of item at Sl.No.1 (ii). Similarly, in case of import of item at Sl.No. 1 (ii), the item at Sl.No.3 (ii) (s) will not be allowed.

C513

Non-alloy Steel bars & rods (including Rounds, Flats, Hexagons, Octagons, Wire Rods, Cold Twisted Bars, thermo mechanically treated reinforcing bars), Angles, Shapes & Sections (including beams, joist, channels, special profiles etc.) and Rails

1000 kgs.

1

Non Alloy steel Ingots
OR

1070 kg

Non Alloy Steel Blooms/ Billets
OR

1050 kg

Non-alloy Steel Re-rollable Scrap as per IS: 2549-1994

1070 kg

2

Rolls for rolling mills

1.77 kg

3

Furnace oil for oil fired reheating furnace in rolling mill

50 kg

4

Saw/ Shear blade

0.01 kg

C514

Non-Alloy Steel Bars & Rods (including Rounds, Flats, Hexagons, Octagons, Wire Rods, Cold Twisted deformed bars, Thermomechanically treated reinforcing Bars etc.,) Angles, Shapes & Sections (including Beam, Joists, Channels, Special Profiles etc.) Plates/ Sheets/ Strips/ Wide Coils, Blooms/ Billets/ Slabs/ Ingots.

1000 kgs

1

a)Copper Scrap/ Copper Cathode/ Copper Wire Bar/ Copper Rod (If copper is present in the export product)

0.04 kg

b)Cored Wires of Lead/ Lead Shots (in case of export of lead bearing free cutting steel only)

2.5 kg

c)1)i)Furnace Oil (only for Units with captive power plant)

70 kg

ii)Lubricant (only for units with captive power Plant)

0.65 kg

2)i)Furnace Oil for oilfired Reheating Furnace in Rolling Mill

50 kg

ii)Furnace Oil for Ladle heating

6 kgs

2

MAJOR INPUTS:

a)Non-Alloy Steel Melting scrap

1200 kgs

b)Low Silica lime stone

95 kgs

3

i)ADDITIVES:

a)Cored wires/ Lumps/ Powder of Calcium Silicide (CaSi)

1 kg

b)Silico Manganese
OR

15 kgs

i) Ferro Silicon and

5 kgs

ii) Ferro Manganese

10 kgs

c)Raw Petroleum Coke

5 kgs

d)Cored Wires/ Scrap/ Ingots/ Shots of Aluminium

1 kg

3

ii)MISC. ITEMS:

a)Graphite Electrode

6 kgs

b)Rolls/ Tungsten Carbide Rings for Rolling Mill

1.77 kgs

c)Copper lined moulds for castings

0.019 kg

d)Shear Blades/ Saw Blades

0.1 kg

e)Ceramic Coated lancing pipe

0.75 kg

f)Temperature Tips

0.022 kg

g)Sampler Tips

0.25 No.

h)Casting Powder

2 kgs

3

iii)REFRACTORIES:

a)Zirconia/ Magnesia Nozzles

b)Aluminium-Graphite Nozzles/ Monoblock Stoppers/ Stopper head/ Stopper Rods/ Shrouds

c)Porous Plugs/ Seat Blocks/ Sleeves/ Slide Gate Plates

d)Direct Bonded Basic Bricks

10 kgs

e) EBT Tube/ Mass/ Bricks

f)Monolithic/ Gunning/ Ramming Mass/ castables

g)Dolomite Magnesia Carbon Bricks

h)Ladle Inner Nozzles/ Collector Nozzles

Note:1.The above norms is applicable only if the export product(s) is/ are manufactured through Electric Arc Furnace route/ Induction Furnace route using steel scrap as basic raw material.
2. In case of export of continous cast billets blooms/ slabs produced through continuous casting route, rolling mill rolls and tungsten carbide ring i.e. Item at Sl.No.3 (ii) (b) will not be allowed. Similarly, against export of Rolled Blooms, Billets, Slabs, refractory items 3(iii)(a&b) shal not be allowed. However, in case of export of rolled products including billets produced out of continuous cast blooms/ billets both item mentioned above i.e. rolls/ tungsten carbide rings and refractories shall be allowed.
3. Items of import at Sl.No.1 (c) (2), 3 (ii) (b),(c), (d), (h) and 3 (iii) (a&b) shall not be permitted against export of Ingots.
4. The item Non Alloy Steel Melting Scrap will be allowed as per the definition given in Section XV of Customs Tariff.

C515

Non-alloy steel wire (uncoated)

1000 Kgs

1

Major Input comprising of:

a)

Non Alloy Steel melting scrap/ Direct Reduced Iron (HBI/ Sponge Iron)

360Kgs.

b)

Low Silica lime stone

218 Kg

c)

Metallurgical coke (with ash content below 15%)

610Kg.

2

Additives comprising of:

i) Cored wires/ lumps/ powder of calcium silicide (CaSi)

ii) Silico Manganese
OR

a) Ferro Silicon

b) Ferro manganese

iii) Raw Petroleum coke

22.46 Kgs

iv) Cored Wires/ Scrap/ Ingots/ Shots of aluminium

v) Copper Scrap/ Copper Cathode/ Copper Wire Bar/ Copper Rod(if copper is actually present in the export product)

0.04 kgs

vi) Cored wire of lead/ lead shots (in case of export of lead bearing free cutting steel only)

2.5 kgs

3

a)

Refractories and Misc. Items:

i) Graphite Electrode

ii) Rolls/ Tungsten Carbide rings for rolling mill

iii) Copper lined mould for casting

iv) Saw/ shear blade

v) Ceramic coated lancing pipe

vi) Temperature tips/ Celox inserts

vii) Sampler tips

viii) Submerged tuyers/ Oxygen lance pipe/ Oxygen Supersonic lance/ tip.

ix) Atmospheric injector

x) Stainless Steel hoses

xi) Refractory items comprising of:

a)

Runner Mass for Mini Blast Furnace/ Castable for Mini Blast Furnace (MBF)

b)

Graphite Carbon refractories for Mini Blast Furnace (MBF)

27 Kg

c)

Magnesia reagent Desulphurisation compound

d)

Zirconia/ Magnesia nozzles

e)

Aluminium graphite nozzles/ Monoblock stoppers/ stopper heads/ stopper rods/ shrouds

f)

Porous plugs/ Seat Blocks/ Sleeves/ Slide gate plates

g)

Direct bonded basic bricks

h)

EBT tubes/ Mass/ Bricks

i)

Monolithic/ gunning/ ramming Mass/ Castables

j)

Dolomite/ Magnesia Carbon bricks

xii) Casting Powder

3

b)

Wire drawing misc. items Comprising of:

i) Dry drawing lubricant

ii) Wire drawing soap

iii) Wet drawing lubricant

34 Kg

iv) Tungsten carbide dies

v) Plastic bobbins/ spools

4

Energy sources comprising of:

a)

i) Furnace oil ( for units with captive power plant)

30 Kg

ii) Lubricant ( for units with captive power plant)

0.65 kg.

4

b)

i) Furnace oil for oil fried reheating frunace in Rolling Mill

50 Kg

ii) Furnace oil for ladle heating

6 kg

Note 1.The above norms is applicable only if the export product(s) is/ are manufactured through Mini Blast Furnace-Electric Arc Furnace route using liquid hot metal as the principal raw material in Electric Arc Furnace.
2. Import of item at Sl. No. 3(b) (iii) (iv) (v) shall be allowed against export of wire of size below 1mm dia only.Import of Direct Reduced iron shall be limited to 10% of total metallic input 360Kgs.

C516

Non-Alloy steel wire uncoated (from melting scrap)

1000 kg

1

Major Inputs comprising of:

a)

Non Alloy Steel Melting Scrap

1200 Kgs

b)

Low Silica Lime Stone

95 kgs

2

Additives comprising of :

a)

Cored Wires/ Lumps/ Powder of Calcium Silicide (CaSi)

b)

Silico Manganese
Or
(i) Ferro silicon
(ii) Ferro manganese

c)

Raw Petroleum Coke

22.46 kgs

d)

Cored Wires/ Scrap/ Copper Cathode/ Copper Wire Bar/ Copper Rod(if copper is actually present in the export product)

e)

Copper Scrap/ Copper Cathode/ Copper wire Bar/ Copper Rod(if copper is actually present in the export product)

0.04 kgs

f)

Cored Wires of lead/ lead Shots. (in case of export of lead bearing free cutting steel only)

2.5 kgs

3

Refractories & Misc. Items

a)

Graphite Electrode

b)

Rolls/ Tungsten Carbide Rings for Rolling mill

c)

Copper lined Moulds for casting

20 kg

d)

Saw/ Shear Blade

e)

Ceramic coated lancing pipe

f)

Temperature Tips

g)

Sampler Tips

h)

Refractory items comprising of:

1) Zirconia/ Magnesia Nozzles

2) Aluminium Graphite Nozzles/ Monoblock Stoppers/ Stopper head/ Stopper Rods/ Shrouds

3) Porous Plugs/ Seat Blocks/ Sleeves/ Slide Gate Plates

4) Direct Bonded basic Bricks

5) EBT Tube/ Mass/ Bricks

6) Monolithic/ Gunning/ Ramming Mass/ Castables

7) Dolomite Magnesia Carbon Bricks

8) Ladle inner Nozzles/ collector Nozzles

3

i)

Casting Powder

4

Wire drawing Misc. Items comprising of:

a)

Dry drawing lubricants

34 kgs

b)

Wire drawing Soap

c)

Wet drawing lubricant

d)

Tungsten carbide dies

e)

Plastic bobbins/ spools

5

Energy sources comprising of:

a)

(i) Furnace Oil (for Units with captive power Plant)

70 kgs

(ii) Lubricant (for units with captive power Plant)

0.65 kg

5

b)

(i) Furnace oil for oil fired Reheating Furnace in Rolling Mill.

50 kgs

(ii) Furnace oil for Ladle heating

6 kg

Note 1. The above norms is applicable only if the export product(s) is/ are manfactured through Electric arc furnace/ Induction furnance route using steel melting scrap as basic raw material.
2. In case the product is manufactured through induction furnace route, the item at Sl.No 3(a) shall not be allowed.
3. Import of items at Sl.Nos 4(c)(d) and (e) shall be allowed against export of wire of size bellow 1mm dia only.
4. The item Non Alloy Steel Melting Scrap will be allowed as per the definition given in Section XV of Customs Tariff.

C517

Non-Alloy/ Alloy steel, Ingots, Blooms, Billets, Slabs, Bars and rods (including Rounds, Flats, Hexagons, Octagons, Wire rods, Cold Twisted Deformed Bars, Thermo Mechanically Treated Reinforcing Bars), Angles, Shapes and Sections (including Beams, Joists, Channels, Special profiles)

1000 Kg

1

Major Input comprising of:

i) Non Alloy Steel melting scrap/ Pig Iron

175 kg

ii) Direct Reduced Iron (HBI/ Sponge Iron)

285 kg

iii) Low Ash Metallurgical Coke (Ash content: 15% max.)

500 Kg

iv) Low Silica Lime Stone

100 kg.

2

Additive comprising of:

i) Calcium Silicide Lumps Powder in Cored wires

0.6 kg

ii) Silico Manganese/ Ferro Silicon/ Ferro Manganese

15 kg

iii) Raw/ Calcined Petroleum Coke/ Graphite Powder

4 kg

iv) Aluminium Scrap/ Ingots/ Shorts/ Wires

1 kg

v) Other ferro alloy(s) (including Ferro/ Charge Nickel/ Nickel Oxide Sinter/ Charge/ Ferro Chrome/ Ferro Vanadium/ Ferro Molybdenum/ Ferro Titanium/ Ferro Niobium) provided the alloying element(s) is/ are actually present in export product

5 kg

vi) Sulphur Stick/ Sulphur Powder in Cored Wire (in caseof export of Sulphur bearing free cutting steel only)

2.5 kg

vii) Lead Wire/ Shots/ Powder in Cored wire (in case of export of lead bearing free cutting steel only)

4 kg

3

Misc. Inputs comprising of:

a)

Graphite Electrodes

4 kg

b)

CI/ Steel Rolls/ TC Rolls/ Rings for rolling mill

0.6 kg

c)

Copper lined Mould/ Copper Mould for Continuous Casting

0.01 kg

d)

Shear blade

0.01 kg

e)

Temperature tips/ Celox inserts

0.05 Nos.

f)

Sampler tips

0.05 Nos.

g)

Submerged tuyers/ Atmospheric injector/ Oxygen lance pipe/ Oxygen Supersonic lance tip

0.77 kg

h)

Shaped Refractories (Fired/ Unfired)

5 kg for non alloy steel
9 kg for alloy steel.

I)

Monolithic Refractories (incl. Castables/ Ramming Mass/ Gunning Mixes)

4 kg for non alloy steel
5 kg for alloy steel.

j)

Specialty Refractories namely, CC refrctory (Shrouds, Mono Block Stopper, SE Nozzles), Slide Gate Refractory, Porous Plug, Zircon/ Zirconia Nozzles & Tundish Nozzles)

1 kg

k)

Casting Powder

1 kg

4

Energy sources comprising of:

a)

i) Furnace oil for Power Generation (for units with captive power plant only)

30 kg

ii) Lubricant for Power Plant (for units with captive power plant)

0.6 kg

b)

i) Furnace oil for Rolling Mill (for units with captive oil fired reheating furnace)

30 kg

ii) Furnace oil for Ladle/ Tundish heating

4 kg

Note 1.The above norms is applicable only if the export product(s) is/ are manufactured through Mini Blast Furnace-Electric Arc Furnace route (with/ without captive DRI plant) using Hot metal as the principal raw material in Electric Arc Furnace.Units with captive DRI plant may import inputs for DRI as per the relevant SIONs.
2. In case of export of continuous cast billets/ blooms/ slabs, items at Sl.No.3(b) and 4(b)(i) shall not be allowed. Similarly against export of rolled bloom, billets,slabs through ingot route, refractory items 3(J) shall not be allowed. However, in case of export of rolled billets/ blooms/ slabs produced out of continous cast bloom/ billets/ slabs, both items mentioned at Sl.No.3(b) and 4(b)(i) shall be allowed.Further, against export of billets/ blooms/ slabs, quantities of all other inputs shall be reduced by 5%.
3. In case of export of Ingots, import of items at Sl.No.3(b), (c), (d), (j) & 4(b) shall not be permitted. Further quantity of other inputs shall be reduced by 10%.
4. Quantity of Silico-Manganese shall not exceed 60% of total permitted quantity of 15 kg.

C518

Refractories Viz. Magnesite bricks

1 MT

1

Dead Burnt magnesite (Magnesium Oxide 55% and above)

1.1 MT

C519

Silica Bricks/ Shapes for Blast Furnace

1000 kgs.

1

Quartzite

1570 kgs

2

(i) Phenolic Based Resin (Liquid)
(ii)Phenolic based Resin (Powder)
(iii) Ligno Sulphate
OR
(iv)Goulac

70 kgs

30 kgs

24 kgs

9 kgs

3

(i) Micro Silica and/ or fused Silica
(ii) Silicon Metal
OR

21 kg

15 kg