C251  

Outdoor Over Head Termination Kits complete with Cable Gland and/or Bush, PVC Shroud And (with or without) Ring Lock Nuts

1 kg

1

Brass Scrap

1.075 kg/kg content in export product

2

PVC Compund
OR

1.05 Kg./kg content in export product.

2

PVC Shrouds

1.05 kg/kg content in export product

3

Non Alloy Steel/Coil/Strip/Plate/Bar

1.05 kg/kg content in export product

C252

Paper Covered Copper conductors (Strips/Wires).

1 kg

1

Continuous Cast Copper Rods/Copper Wire Rods /Bars/Cathodes (EC Grade)

1.02 kg/kg content in the export product.

2

Relevant Insulating Paper

1.02Kg/Kg content in the export product.

C253

Plated Wires (Single/Stranded)
(A) of Copper
OR
(B) of Copper Clad/Coated Steel
OR
(C) of Copper Alloy.

1 kg

1

A)

Copper Cathode/Wire Bar/CC Rod/Wire/Copper Wire Rod
OR
B Copper Clad/coated Steel Wire
OR
C. Copper Alloy Wire/Cathode/Wire Bar/C C Rod/Wire/Copper Wire Rod

1 Kg

1 Kg

1 Kg.

2

Silver 99.9% purity (Ingot, Granules, Plates or Powder)

0.025Kg.

3

Wire Drawings Dies, Drawing Lubricants Welding Dies, Tin, Nickel, S-Nickel, Electroplating Salts, Plating Additives.

2% of the FOB value of exports

4

Plastic Bobbins, Plastic Spools, Protective paper/film.

As per packing policy.

Export product may have Silver, Nickel or Tin plating on it, but Silver will be allowed only if the export product has Silver plating on it.Import of base metal in 1 a), b) or c) will be allowed depending on the base metal used in export product (a) or (b) or (c)

C254

PTFE Insulated Wires and Cables with conductor diameter more than 0.5mm

1 kg

1

Copper (Cathode/Wire Bar/Continuous Cast Rod/Wire/Alloy Wire)/Copper Wire Rod

1.02 kg/kg of net content in the export product.

2

PTFE Resin Fine Powder

1.15 kg/kg of net content in the export product

3

Silver 99.9% Purity (Ingots/Shots/Powder)

1.003 kg/kg of net content in the export product

4

Pigments,Ink,Silicone Fluid, Polyimide Film(Kapton), Low-noise Dispersion, Tween-85, Synthetic Resin, Yarn Plain & Finished Sized including Glass Fibre Yarn, Finished forms, Dispersions of Polymeric Resins

Upto 2% of the FOB value of Export.

5

S.Nickel, Unplated or Plated Single or Multistrand Wire of Copper/Copper Alloy/Copper covered Steel/Nickel/Resistance Alloys/Stainless Steel, Connectors Flat/Round/Coaxial, Terminations.

Upto 2% of the FOB Value of exports

Note:1. Silver or Nickel will be allowed on relevance basis, i.e. for silver coated wires, silver will be allowed and for nickel coated wires, nickel will be allowed.

C255

PTFE Insulated Wire with conductor diameter equal to or less than 0.5 mm and PTFE Thickness less than 0.18mm

1 kg

1

Copper (Cathode/Wire Bar/continuous Cast Rod/Wire/Alloy Wire)/Copper Wire Rod

1.02 kg/kg of net content in the export product.

2

PTFE Resin Fine Powder

1.35 kg/kg of net content in the export product.

3

Silver 99.9 % Purity (Ingots/Shots/Powder)

1.003 kg/kg of net content in the export product.

4

Pigments,Ink,Silicone Fluid,Polyimide Film(Kapton),Low noise Dispersion,Tween-85,Synthetic Resin,Yarns Plain & Finished Sized including Glass Fibre Yarn, Finished forms, Dispersions of Polymeric Resin

Upto 2% of the FOB value of exports.

5

S. Nickel, Unplated or plated single or Multistrand Wire of Copper/Copper Alloy/Copper covered Steel/Nickel/Resistance Alloys/Stainless Steel, connectors Flat/Round/Coaxial, Terminations

Upto 2% of the FOB Value of exports.

Note:1. Silver or Nickel will be allowed on relevance basis, i.e. for silver coated wires, silver will be allowed and for nickel coated wires, nickel will be allowed.

C256

PVC 3 Core Flat Cable Suitable upto 1100 V of size - 3x1.5 sq.mm(22/.3) Overall Dimension = Width(mm)xThickness(mm) i.e. 12.8x6.0

1000 Meters

1

Copper Wire Rods (EC Grade)

41.89 kgs.

2

PVC Compound
OR

91.72 kgs.

2

i) PVC Resin

58.70 kgs.

ii) Plasticizer

24.77 kgs.

iii) Filler(Calcium Carbonate/Alumina/Talc/Kaoline)

4.38 kgs.

iv) Lubricants

0.88 kg.

C257

PVC 3 Core Flat Cable suitable upto 1100 V of size - 3x2.5 sq.mm(36/.3)Overall Dimension = Width(mm)xThickness(mm) i.e. 14.6x6.4

1000 Meters

1

Copper Wire Rods (EC Grade)

68.55 kgs.

2

PVC Compound
OR

116.41 kgs.

2

i) PVC Resin

74.30 kgs.

ii) Plasticizer

31.44 kgs.

iii) Filler(Calcium Carbonate/Alumina/Talc/Kaoline)

5.81 kgs.

iv) Lubricants

1.12 kg.

C258

PVC 3 Core Flat Cable suitable upto 1100 V of size - 3x4.0 sq.mm(57/.3) Overall Dimension = Width(mm)xThickness(mm) i.e. 17.2x7.4

1000 Meters

1

Copper Wire Rods (EC Grade)

108.54 kgs.

2

PVC Compound
OR

141.38 kgs.

2

i) PVC Resin

90.43 kgs.

ii) Plasticizer

38.18 kgs.

iii) Filler(Calcium Carbonate/Alumina/Talc/Kaoline)

7.06 kgs.

iv) Lubricants

1.36 kg.

C259

PVC 3 Core Flat Cable suitable upto 1100 V of size - 3x6.0sq.mm(85/.3)overall Dimension = Width(mm)xThickness(mm) i.e. 18.7x7.9

1000 Meters

1

Copper Wire Rods (EC Grade)

161.86 kgs.

2

PVC Compound
OR

164.12 kgs.

2

i) PVC Resin

105.04 kgs.

ii) Plasticizer

44.33 kgs.

iii) Filler(Calcium Carbonate/Alumina/Talc/Kaoline)

8.19 kgs.

iv) Lubricants

1.57 kg.

C260

PVC 3 Core Flat Cable suitable upto 1100 V of size - 3x10.0 sq.mm(140/.3) overall dimension =width(mm)xThickness(mm) i.e. 23.7x9.9

1000 Meters

1

Copper Wire Rods (EC Grade)

266.60 kgs.

2

PVC Compound
OR

246.77 kgs.

2

i) PVC Resin

159.93 kgs.

ii) Plasticizer

66.65 kgs.

iii) Filler(Calcium Carbonate/Alumina/Talc/Kaoline)

12.32 kgs.

iv) Lubricants

2.37 kg.

C261

PVC 3 Core Flat Cable suitable upto 1100 V of size - 3x16.0 sq.mm(226/.3) overall Dimension =width(mm)xThickness(mm) i.e. 28.0x11.4

1000 Meters

1

Copper Wire Rods (EC Grade)

430.37 kgs.

2

PVC Compound
OR

306.05 kgs.

2

i) PVC Resin

159.87 kgs.

ii) Plasticizer

82.66 kgs.

iii) Filler(Calcium Carbonate/Alumina/Talc/Kaoline)

15.23 kgs.

iv) Lubricants

2.94 kg.

C262

PVC 3 Core Flat Cable Suitable upto 1100 V of size - 3x25.0 sq.mm(334/.3) Overall Dimension = Width(mm)x Thickness(mm) i.e. 35.5x14.7

1000 Meters

1

Copper Wire Rods (EC Grade)

674.12 kgs.

2

PVC Compound
OR

487.98 kgs.

2

i) PVC Resin

312.30 kgs.

ii) Plasticizer

131.70 kgs.

iii) Filler(Calcium Carbonate/Alumina/Talc/Kaoline)

24.36 kgs.

iv) Lubricants

4.68 kg.

C263

PVC 3 Core Flat cable Suitable upto 1100 V of size - 3x35.0 sq.mm(493/.3) overall Dimension = Width(mm)xThickness(mm) i.e. 39.5x16.2

1000 Meters

1

Copper Wire Rods (EC Grade)

942.63 kgs.

2

PVC Compound
OR

570.00 kgs.

2

i) PVC Resin

364.80 kgs.

ii) Plasticizer

153.94 kgs.

iii) Filler(Calcium Carbonate/Alumina/Talc/Kaoline)

28.45 kgs.

iv) Lubricants

5.47 kg.

C264

PVC 3 Core Flat Cable Suitable upto 1100 V of size - 3x50.0 sq.mm(703/.3) Overall Dimension = Width(mm)xThickness(mm) i.e. 45.5x18.3

1000 Meters

1

Copper Wire Rods (EC Grade)

1338.72 kgs.

2

PVC Compound
OR

759.35 kgs.

2

i) PVC Resin

485.98 kgs.

ii) Plasticizer

205.08 kgs.

iii) Filler(Calcium Carbonate/Alumina/Talc/Kaoline)

37.91 kgs.

iv) Lubricants

7.29 kg.

C265

PVC 3 Core Flat Cable suitable upto 1100 V of size - 3x70.0 sq.mm(440/.45) Overall Dimension = Width(mm)xThickness(mm) i.e. 51.0x20.0

1000 Meters

1

Copper Wire Rods (EC Grade)

1885.24 kgs.

2

PVC Compound
OR

921.02 kgs.

2

i) PVC Resin

589.45 kgs.

ii) Plasticizer

248.75 kgs.

iii) Filler(Calcium Carbonate/Alumina/Talc/Kaoline)

45.98 kgs.

iv) Lubricants

8.84 kg.

C266

PVC 3 Core Flat Cable Suitable upto 1100 V of size- 3x95.0 sq.mm(485/.50) Overall Dimension = Width(mm)xThickness(mm) i.e. 60.0x23.5

1000 Meters

1

Copper Wire Rods (EC Grade)

2365.50 kgs.

2

PVC Compound
OR

1206.57 kgs.

2

i) PVC Resin

772.20 kgs.

ii) Plasticizer

325.87 kgs.

iii) Filler(Calcium Carbonate/Alumina/Talc/Kaoline)

60.23 kgs.

iv) Lubricants

11.58 kg.

C267

PVC Insulated Power Cable with Copper Conductor Unarmoured for Voltage upto 1000 V - Size: 3 Core x 1 Sq.mm

1 KM

1

Copper in the form of Copper Cathode/Wire Bars/CC Rods (EC Grade)/Copper Wire Rod

26.936 kgs

2

PVC Compound
OR

74.80 kgs

a)

PVC Resin

44.880 kgs

b)

DOP

22.440 kgs

c)

Fillers

7.480 kgs

C268

PVC Insulated Power Cable with Copper Conductor Unarmoured for Voltage upto 1000 V - Size: 3 Core x 0.75 Sq.mm

1 KM

1

Copper in the form of Copper Cathode/Wire Bars/CC Rods (EC Grade)/Copper Wire Rod

20.20 kgs

2

PVC Compound

71.38 kgs

C269

PVC Insulated Power Cable with Copper Conductor Unarmoured for Voltage upto 1000 V - Size: 3 Core x 0.50 Sq.mm

1 KM

1

Copper in the form of Copper Cathode/Wire Bars/CC Rods (EC Grade)/Copper Wire Rod

13.46 kgs

2

PVC Compound

60.17 kgs

C270

PVC Insulated Power Cable/ L.T PVC Cables of various sizes with Copper/ Aluminium Conductors unarmoured/ armoured for Voltage upto 1000 V of different sizes as given in Engineering - Table 6.

1 KM

1

(a) Copper in the form of Copper Cathode/ Wire Bars/ CC Rods (EC Grade)/Copper Wire Rod
OR

*

1

(b) Aluminium in the form of Ingots/ Proper Zi Rods

*

2

a)

PVC Compound for Unarmoured

b)

OR PVC Compound for Armoured

*

c)

I) PVC Resin

60% of weight of PVC compound allowed in Engg. Table 6.

c)

II) Plasticizer

30% of weight of PVC compound allowed in Engg. Table 6.

c)

III) Filler (Calcium Carbonate/Alumina/Talc/Kaoline)

10% of weight of PVC compound allowed in Engg. Table 6.

* Note : The quantity of these item will be as per the Engineering Table 6 given at the end of this product group.If the alternative item I.e. PVC Resin, DOP & Filler is sought in lieu of import item No. 2 PVC compound, their import shall be permitted to the extent stated below:1. PVC Resin-60% of the permissble quantity of PVC compound as per Engg. Table -5.2. DOP-30% of the permissble quantity of PVC compound as per Engg. Table -5.3.Filler-10% of the permissble quantity of PVC compound as per Engg. Table -5.Wherever PVC stabilizer is asked for it may be allowed upto 3% of the quantity of PVC compound, subject to reduction of the same % age in the quantity of PVC resin.

C271

PVC Insulated Triple Core mining cable for voltage upto 1100 V of different sizes as given in Engineering - Table 7.

1 KM

1

Copper in the form of Copper Cathode/ CC Rods/ Wire Bars (EC Grade)/Copper Wire Rod

*

2

PVC Compound

*

* Note : The quantity of these items will be as per the Engineering Table 7 given at the end of this product group.

C272

PVC Insulated Triple Core mining cable for voltage upto 3300 V of different sizes as given in Engineering - Table 8.

1 KM

1

Copper in the form of Copper Cathode/ CC Rods/ Wire Bars (EC Grade)/Copper Wire Rod

*

2

PVC Compound

*

* Note : The quantity of these items will be as per the Engineering Table 8 given at the end of this product group.

C273

R Core (Round Shaped, Strip Wound Core)

1 MT

1

CRGO Steel Strips/Coils

1.24 MT/MT content in the export product.

C274

Radiators for Transformers (made out of CRCA Steel Sheet/ Coil

1 kg

1

CRCA Non-Alloy Steel Sheets/Coils

1.05 kg/kg

Note: In case of Coated/Painted radiators, relevant coating/painting materials may be allowed on actual requirement basis upto 10% of the FOB value of export

C275

Rectifier tanks made of CRCA Sheets

1 kg content of import item

1

Mild steel CRCA Sheets/ cuttings/ coils/ defective/ secondary

1.05 kg

C276

Reflector for 40 W Twin Tube Box Type Industrial Fitting duly prewired with vaccum pressure impregnated copper wound open type Ballast , Power Factor Improvement Capacitor, Starter, Starter Seat,Mains Terminal and Lamp Holders.

1 No.

1

CRCA Sheet

2 kgs.

C277

Screen Insulation Sleeve System

1 No.

1

Heat Shrinkable Conducting Tubing

2 Mtrs.

2

Heat Shrinkable Anti Tracking Tubing

2 Mtrs.

3

Heat Shrinkable Stress Control Tubing

0.5 Mtrs.

4

Anti Tracking Mastic Tape

3.0 Mtrs.

C278

Single Phase Electrical Energy Meter

1 No.

1

Aluminium/ Aluminium Alloy Ingots/Sheets

1.05 kg/kg content in export.

2

Brake Magnet/ Bearing Magnets

Net to net.

3

Relevant Plastic/Rubber Parts

Net to net.

4

MS Sheets/Coils/ Strips

1.05 kg/kg content in export.

5

CRNGO Sheets/Coils/ Strips

1.25 kg/kg content in export.

6

Copper Winding Wire
OR
Copper Ingots/ Bars/ Rods (Electrolytic Grade)

1.01 kg/kg content in export

1.02 kg/kg content in the export.

7

Bearing Assembly

Net to net.

8

Stainless Steel Rods/ Wire Rods/ Bar/ Rounds

1.05 kg/kg content in export.

9

Registered Assembly

1 No. (Net to net)

10

Phenolic Resin

1.05 kg/kg content in the export product

11

Brass Sheets/ coils/ strips/ scraps

1.05 kg/kg content in the export product

C279

Single Phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 Watts to 90 Watts
OR
Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 0 watts to 90 wattsunder SKD condition

1 No.

1

Cold Rolled Non-oriented (CRNO) electrical steel sheets/sheets in coil form

47.80 gms/Watt

2

Copper wire bars/cathodes/rods/winding wires/strips

10.41 gm/Watt

3

Electrolytic grade aluminium for rotor

10.00 gms/Watt

4

Commercial grade aluminium in ingot form (upto 99.5% purity) for housing
OR

10.00 gms/Watt

4

CRCA Sheets for housing
OR

15.00 gms/Watt

4

Mild Steel sheets for housing

10.99 gms/Watt

5

EN-8 Alloy Steel for shaft

9.65 gms/Watt

6

Ball/Sleeve/Roller Bearings

2 Nos.(Net to net)

7

Composite insulation material consisting of paper, nylon, polyester, amide, nomex films

1.5% of FOB price

8

Thermal protectors/thermo strips

Net to net.

9

Power Capacitor

1 No. (Net to net)

10

Strain relief bush

1 No.

11

Pull chain switch with chord

1 No.

12

Aluminium alloy

0.50 kgs

13

Lead wire

1.175 Mtrs

14

Power supply chord

2 Nos.

15

CRCA Steel for end shields, mounting base, Lugs & pads

1.50 kgs.

16

Open circuit switch

1 No.

17

Centrifugal gear

1 No.

18

Terminal/ Crimp cap

3 Nos. or 4 Nos.(as per requirement: quantity to be accounted for in the export product)

19

Quick connect/ disconnect terminals/ receptacles and tabs with/ without insulation

3 or 4 sets (as per requirements quantity to be accounted for in the export product)

20

Plastic film for labels/ name plates

10 grams

21

Transfer ribbon for labels/ name plates

8 sq. inches

C280

Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 Watts to 180 Watts
OR
Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 91 watts to 180watt under SKD condition

1 No.

1

Cold Rolled Non-oriented (CRNO) electrical steel sheets/sheets in coil form

46.87 gms/Watt

2

Copper wire bars/cathodes/rods/winding wires/strips

7.19 gm/Watt

3

Electrolytic grade aluminium for rotor

5.58 gms/Watt

4

Commercial grade aluminium in ingot form (upto 99.5% purity) for housing
OR

6.00 gms/Watt

4

CRCA Sheets for housing
OR

9.00 gm/Watt

4

Mild Steel sheets for housing

8.36 gms/Watt

5

EN-8 Alloy Steel for shaft

5.70 gms/Watt

6

Ball/Sleeve/Roller Bearings

2 Nos.(Net to net)

7

Composite insulation material consisting of paper, nylon, polyester, amide, nomex films

1.5% of FOB price

8

Thermal protectors/thermo strips

Net to net.

9

Power Capacitor

1 No. (Net to net)

10

Strain relief bush

1 No.

11

Pull chain switch with chord

1 No.

12

Aluminium alloy

0.50 kg

13

Lead wire

1.175 Mtr

14

Power supply chord

2 Nos.

15

CRCA steel for end shields, mounting base, Lugs & pads

1.50 kgs

16

Open circuit switch

1 No.

17

Centrifugal gear

1 No.

18

Terminal/ Crimp cap

3 Nos. or 4 Nos. (as per requirement: quantity to be accounted for in the export product)

19

Quick connect/ disconnect terminals/ receptacles and tabs with/ without insulation

3 or 4 sets (as per requirements quantity to be accounted for in the export product)

20

Plastic film for labels/ name plates

10 grams

21

Transfer ribbon for labels/ name plates

8 sq. inches

C281

Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 Watts to 750 Watts
OR
Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 181 watts to 750watts under SKD condition

1 No.

1

Cold Rolled Non-oriented (CRNO) electrical steel sheets/sheets in coil form

20.76 gms/Watt

2

Copper wire bars/cathodes/rods/winding wires/strips

2.76 gm/Watt

3

Electrolytic grade aluminium for rotor

2.80 gms/Watt

4

Commercial grade aluminium in ingot form (upto 99.5% purity) for housing
OR

2.80 gms/Watt

4

CRCA Sheets for housing
OR

4.20 gms/Watt

4

Mild Steel sheets for housing

4.88 gms/Watt

5

EN-8 Alloy Steel for shaft

1.98 gms/Watt

6

Ball/Sleeve/Roller Bearings

2 Nos.(Net to net)

7

Composite insulation material consisting of paper, nylon, polyester, amide, nomex films

1.5% of FOB price

8

Thermal protectors/thermo strips

Net to net.

9

Power Capacitor

1 No. (Net to net)

10

Strain relief bush

1 No.

11

Pull chain switch with chord

1 No.

12

Aluminium alloy

0.50 kg

13

Lead wire

1.175 Mtrs

14

Power supply chord

2 Nos

15

CRCA steel for end shields, mounting base, Lugs & pads

1.50 kgs

16

Open circuit switch

1 No.

17

Centrifugal gear

1 No.

18

Terminal/ Crimp cap

3 Nos. or 4 Nos. (as per requirement quantity to be accounted for in the export product)

19

Quick connect/ disconnect terminals/ receptacles and tabs with/ without insulation

3 or 4 sets as per requirement quantity to be accounted for in the export product

20

Plastic film for labels/ name plates

10 grams

21

Transfer ribbon for labels/ name plates

8 sq. inches

C282

Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 Watts & above
OR
Single phase shell construction motors with aluminium or cast iron or sheet metal end covers - 751 watts and aboveunder SKD condition

1 No.

1

Cold Rolled Non-oriented (CRNO) electrical steel sheets/sheets in coil form

19.39 gms/Watt

2

Copper wire bars/cathodes/rods/winding wires/strips

1.89 gm/Watt

3

Electrolytic grade aluminium for rotor

1.63 gms/Watt

4

Commercial grade aluminium in ingot form (upto 99.5% purity) for housing
OR

1.63 gms/Watt

4

CRCA Sheets for housing
OR

2.44 gms/Watt

4

Mild Steel sheets for housing

2.83 gms/Watt

5

EN-8 Alloy Steel for shaft

1.18 gms/Watt

6

Ball/Sleeve/Roller Bearings

2 Nos.(Net to net)

7

Composite insulation material consisting of paper, nylon, polyester, amide, nomex films

1.5% of FOB price

8

Thermal protectors/thermo strips

Net to net.

9

Power Capacitor

1 No. (Net to net)

10

Strain relief bush

1 No.

11

Pull chain switch with chord

1 No.

12

Aluminium alloy

0.50 kg

13

Lead wire

1.175 Mtrs

14

Power supply chord

2 Nos.

15

CRCA steel for end shields, mounting base, Lugs & pads

1.50 kgs

16

Open circuit switch

1 No.

17

Centrifugal gear

1 No.

18

Terminal/ Crimp cap

3 Nos. or 4 Nos. (as per requirement quantity to be accounted for in the export product)

19

Quick connect/ disconnect terminals/ receptacles and tabs with/ without insulation

3 or 4 sets (as per requirements quantity to be accounted for in the export product)

20

Plastic film for labels/ name plates

10 grams

21

Transfer ribbon for labels/ name plates

8 sq. inches

C283

Single Phase Transformers above 100000 KVA

1 No.

1

CRGO Steel laminations/sheets/coil

0.57 kgs/KVA

2

Copper winding wires/ strips/ wire bars/ wire rods/ cathodes

0.09 kg/KVA

3

Transformer Oil
OR
Transformer Oil Base Stock

0.21 kgs/KVA
OR
0.23Kg/KVA.

4

Phenolic Resin bonded paper

0.023 kgs/KVA

5

Pre Compressed Press Board

0.05 kg per KVA

6

Press Board Moulding

1 Set (Net to net)

7

Motorised Off Load/ on Load Tapchanger

1 No. (Net to net)

C284

Single Phase Transformers above 25000 KVA upto 63000 KVA

1 No.

1

CRGO Steel laminations/sheets/coil

0.79 kgs/KVA

2

Copper winding wires/ strips/ wire bars/ wire rods/ cathodes

0.16 kg/KVA

3

Transformer Oil
OR

0.58 kgs/KVA

3

Transformer Oil Base Stock

0.64 kgs/KW

4

Phenolic Resin bonded paper

0.06 kgs/KVA

5

Pre Compressed Press Board

0.08 kg per KVA

6

Press Board Moulding

1 Set per Job

7

Motorised Off Load/ on Load Tapchanger

1 No. per Job

C285

Single Phase Transformers abvoe above 63000 KVA upto 100000 KVA

1 No.

1

CRGO Steel laminations/sheets/coil

0.66 kgs/KVA

2

Copper winding wires/ strips/ wire bars/ wire rods/ cathodes

0.15 kg/KVA

3

Transformer Oil
OR

0.47 kgs/KVA

3

Transformer Oil Base Stock

0.52 kgs/KVA

4

Phenolic Resin bonded paper

0.042 kgs/KVA

5

Pre Compressed Press Board

0.05 kg per KVA

6

Press Board Moulding

1 Set (Net to net)

7

Motorised Off Load/ on Load Tapchanger

1 No. (Net to net)

C286

Squirrel cage flame proof motor suitable for upto & including 660 V, 3 Phase, AC supply - 7.5 KW to 22.4 KW

1 No.

1

Cold Rolled Non-oriented (CRNO) electrical steel sheets/sheets in coil form

8.48 kgs/KW

2

Copper wire bars/cathodes/rods/winding wires/strips

0.85 kg/KW

3

Pig iron for housing

8.45 kgs/KW

4

Electrolytic grade aluminium for rotor

0.25 kg/KW

5

EN-8 Alloy Steel for shaft

1.35 kgs/KW

6

Ball/Sleeve/Roller Bearings

2 Nos.(Net to net)

7

Composite insulation material consisting of paper, nylon, polyester, amide, nomex films

1.5% of FOB price

C287

Squirrel cage flame proof motor suitable for upto & including 660 V, 3 Phase, AC supply - 22.5 KW to 56.0 KW

1 No.

1

Cold Rolled Non-oriented (CRNO) electrical steel sheets/sheets in coil form

6.83 kgs/KW

2

Copper wire bars/cathodes/rods/winding wires/strips

0.64 kg/KW

3

Pig iron for housing

5.24 kgs/KW

4

Electrolytic grade aluminium for rotor

0.21 kg/KW

5

EN-8 Alloy Steel for shaft

1.03 kgs/KW

6

Ball/Sleeve/Roller Bearings

2 Nos.(Net to net)

7

Composite insulation material consisting of paper, nylon, polyester, amide, nomex films

1.5% of FOB price

C288

Squirrel cage flame proof motors suitable for upto & including 660 V, 3 Phase AC supply - 0 KW to 0.75 KW

1 No.

1

Cold Rolled Non-oriented (CRNO) electrical steel sheets/sheets in coil form

18.48 kgs/KW

2

Copper wire bars/cathodes/rods/winding wires/strips

2.22 kg/KW

3

Pig iron for housing

43.83 kgs/KW

4

Electrolytic grade aluminium for rotor

0.56 kg/KW

5

EN-8 Alloy Steel for shaft

3.04 kgs/KW

6

Ball/Sleeve/Roller Bearings

2 Nos.(Net to net)

7

Composite insulation material consisting of paper, nylon, polyester, amide, nomex films

1.5% of FOB price

C289

Squirrel cage flame proof motors suitable for upto & including 660 V, 3 Phase, AC supply - above 0.76 KW to 7.4 KW

1 No.

1

Cold Rolled Non-oriented (CRNO) electrical steel sheets/sheets in coil form

10.77 kgs/KW

2

Copper wire bars/cathodes/rods/winding wires/strips

1.15 kg/KW

3

Pig iron for housing

14.23 kgs/KW

4

Electrolytic grade aluminium for rotor

0.31 kg/KW

5

EN-8 Alloy Steel for shaft

1.56 kgs/KW

6

Ball/Sleeve/Roller Bearings

2 Nos.(Net to net)

7

Composite insulation material consisting of paper, nylon, polyester, amide, nomex films

1.5% of FOB price

C290

Squirrel cage screen protected (SP)/ Drip proof (DP) motors suitable for upto & including 660 V, 3 Phase, AC supply - 0.76 KW to 7.4 KW

1 No.

1

Cold Rolled Non-oriented (CRNO) electrical steel sheets/sheets in coil form

9.60 kgs/KW

2

Copper wire bars/cathodes/rods/winding wires/strips

0.91 kg/KW

3

Pig iron for housing
OR

6.79 kgs/KW

3

Commercial grade aluminium in ingot form (upto 99.5% purity) for housing

2.27 kgs/KW

4

Electrolytic grade aluminium for rotor

0.46 kg/KW

5

EN-8 Alloy Steel for shaft

1.33 kgs/KW

6

Ball/Sleeve/Roller Bearings

2 Nos.(Net to net)

7

Composite insulation material consisting of paper, nylon, polyester, amide, nomex films

1.5% of FOB price

C291

Squirrel cage screen protected (SP)/ Drip proof (DP) motors suitable for upto & including 660 V, 3 Phase, AC supply - 7.5 KW to 22.4 KW

1 No.

1

Cold Rolled Non-oriented (CRNO) electrical steel sheets/sheets in coil form

5.94 kgs/KW

2

Copper wire bars/cathodes/rods/winding wires/strips

0.68 kg/KW

3

Pig iron for housing
OR

5.05 kgs/KW

3

Commercial grade aluminium in ingot form (upto 99.5% purity) for housing

1.68 kgs/KW

4

Electrolytic grade aluminium for rotor

0.17 kg/KW

5

EN-8 Alloy Steel for shaft

1.22 kgs/KW

6

Ball/Sleeve/Roller Bearings

2 Nos.(Net to net)

7

Composite insulation material consisting of paper, nylon, polyester, amide, nomex films

1.5% of FOB price

C292

Squirrel cage screen protected (SP)/ Drip proof (DP) motors suitable for upto & including 660 V, 3 Phase, AC supply - 22.5 KW to 74.0 KW

1 No.

1

Cold Rolled Non-oriented (CRNO) electrical steel sheets/sheets in coil form

5.24 kgs/KW

2

Copper wire bars/cathodes/rods/winding wires/strips

0.44 kg/KW

3

Pig iron for housing
OR

3.37 kgs/KW

3

Commercial grade aluminium in ingot form (upto 99.5% purity) for housing

1.12 kgs/KW

4

Electrolytic grade aluminium for rotor

0.14 kg/KW

5

EN-8 Alloy Steel for shaft

1.14 kgs/KW

6

Ball/Sleeve/Roller Bearings

2 Nos.(Net to net)

7

Composite insulation material consisting of paper, nylon, polyester, amide, nomex films

1.5% of FOB price

C293

Squirrel cage screen protected (SP)/ Drip Proof (DP) motors suitable for upto & including 660 V, 3 Phase, AC supply - 75.0 KW to 374 KW

1 No.

1

Cold Rolled Non-oriented (CRNO) electrical steel sheets/sheets in coil form

4.44 kgs/KW

2

Copper wire bars/cathodes/rods/winding wires/strips

0.58 kg/KW

3

Pig iron for housing
OR

2.86 kgs/KW

3

Commercial grade aluminium in ingot form (upto 99.5% purity) for housing

0.95 kgs/KW

4

EN-8 Alloy Steel for shaft

0.79 kgs/KW

5

Ball/Sleeve/Roller Bearings

2 Nos.(Net to net)

6

Composite insulation material consisting of paper, nylon, polyester, amide, nomex films

1.5% of FOB price

C294

Squirrel cage screen protected (SP)/ Drip Proof (DP) motors suitable for upto & including 660 V, 3 Phase, AC supply - 375 KW & above.

1 No.

1

Cold Rolled Non-oriented (CRNO) electrical steel sheets/sheets in coil form

3.46 kgs/KW

2

Copper wire bars/cathodes/rods/winding wires/strips

0.63 kg/KW

3

Mild Steel sheets for housing

3.42 kgs.KW

4

EN-8 Alloy Steel for shaft

0.97 kgs/KW

5

Ball/Sleeve/Roller Bearings

2 Nos.(Net to net)

6

Composite insulation material consisting of paper, nylon, polyester, amide, nomex films

1.5% of FOB price

C295

Squirrel cage screen protected (SP)/Drip Proof (DP) Motors suitable for upto & including 660 V, 3 Phase, AC supply - 0 KW to 0.75 KW

1 No.

1

Cold Rolled Non-oriented (CRNO) electrical steel sheets/sheets in coil form

20.54 kgs/KW

2

Copper wire bars/cathodes/rods/winding wires/strips

1.90 kg/KW

3

Pig iron for housing
OR

14.00 kgs/KW

3

Commercial grade aluminium in ingot form (upto 99.5% purity) for housing

4.63 kgs/KW

4

Electrolytic grade aluminium for rotor

0.71 kg/KW

5

EN-8 Alloy Steel for shaft

2.08 kgs/KW

6

Ball/Sleeve/Roller Bearings

2 Nos.(Net to net)

7

Composite insulation material consisting of paper, nylon, polyester, amide, nomex films

1.5% of FOB price

C296

Stainless Steel Cable Ties made of SS316 Grade

1 kg

1

Stainless Steel Strips/Coils of 316 Grade

1.25 kg

C297

Stamping (statorr & Rotor sets) for Electric Motors.

1 kg

1

CRGO/CRNGO Sheets/Coils

2.20 Kg/kg content in the export product.

C298

Starter Motor Armature for High Speed Vehicles Cars etc.

1 No.

1

Copper Electrolytic Grade Standard Wire/ Bar/Rod/Ingots

0.900 kg

2

CRNGO Steel Sheet/ Coil 0.5 to 1.0 mm thickness

1.600 kgs

3

Soldering Wire/ Billet

0.025 kg

4

Nomex/Hypertherm F3 Ply, Grade 33/313 Thickness 0.16 to 0.21 mm in rolls/sheets or equivalent

0.020 kg

C299

Stator for Alternator for Heavy Duty (12 Volts 105-190 Amps)

1 No.

1

Copper Electrolytic Grade Standard Wire/ Bar/Rod/Ingots

0.900 kg

2

CRNGO Steel Sheet/Coil 0.5 to 1.0 mm thickness

4.200 kgs

3

Soldering Wire/ Billet

0.015 kg

4

Nomex/Hypertherm F3 Ply, Grade 33/313 Thickness 0.16 to 0.21 mm in rolls/sheets or equivalent

0.035 kg

C300

Stator for Alternator for Medium Duty (12 Volts 95-105 Amps)

1 No.

1

Copper Electrolytic Grade Standard Wire/ Bar/Rod/Ingots

0.700 kg

2

CRNGO Steel Sheet/ Coil 0.5 to 1.0 mm thickness

3 kgs

3

Soldering Wire/ Billet

0.010 kg

4

Nomex/Hypertherm F3 Ply, Grade 33/313 Thickness 0.16 to 0.21 mm in rolls/sheets or equivalent

0.020 kg

C301

Steel Welding Electrodes made of Mild Steel/ Stainless Steel

1 Kg.

1

Relevant Mild Steel Wire Rod/ Stainless Steel Wire Rod

0.70 Kg

2

Low Carbon Ferro Manganese

0.031 Kg

3

Futile Sand

0.142 Kg

4

Titanium Dioxide

0.032 Kg

C302

Street Lighting Fittings suitable for 40 W F.T.L. duly prewired with vaccum pressure impregnated copper wound open type Ballast, Power Factor Improvement Capacitor, Starter, Starter Seat, Mains Terminal and Lamp Holders.

1 No.

1

CRCA Sheet

1 kg.

2

Ballast

1 No.

3

Holders

2 Nos.

4

Capacitors

1 No.

5

Starter

1 No.

C303

Deleted

C304

Deleted

C305

Deleted

C306

Deleted

C307

Deleted

C308

Thermocouple Cartridges of Platinum/Platinum Rhodium Alloy

1000 Nos.

1

Thermocouple Wire 0.05 mm Diameter Pure Platinum
OR

1.96 gms.

1

Thermocouple Wire 0.05 mm Diameter Platinum 13% Rhodium (Relevant to be used in export product)

1.99 gms.

2

Quartz Glass Tube OD-3 mm, ID-2 mm (Relevant to be used in the export product

0.547 kg.

C309

Thermocouple Cartridges of PT/PT-13% RH (type-R) Mark VII
OR
Expandable Thermocouple Tips in PT/PT 13% RH (Type R) with paper tube of various length - Mark VII

100 Nos.

1

Thermocouple Quality Platinum Wire Diameter 0.04 mm to 0.06 mm

1.05 kg/kg content in export.

2

Thermocouple Quality Wire 13% Rhodium/Platinum Diameter 0.04 mm to 0.06mm

1.05 kg/kg content in export.

3

Quartz Glass Tubes: ID - 2 mm, OD - 3 mm

Net to net.

C310

Three Jar Mixer with Stainless Steel Jar for Kitchen appli- cation

1 No.

1

Polypropylene Moulding Powder

1.05 kg/kg content in the export product.

2

Natural/Synthetic Rubber(Relevent item to be allowed)

1.05 kg/kg content in the export product.

3

Brass Scrap

1.05 kg/kg content in the export product.

4

ABS MouldingPowder

1.05 kg/kg content in the export product.

5

Nylon Moulding Powder

1.05 kg/kg content in the export product.

6

Stainless Steel Sheets/Coils

1.15 kg/kg content in the export product.

7

Aluminium Ingots

1.05 kg/kg content in the export product.

8

Bronze

1.05 kg/kg content in the export product.

9

Phenol Formaldehyde

1.05 kg/kg content in the export product.

10

Stainless Steel Round Bar

1.05 kg/kg content in the export product.

11

Polycarbonate Moulding Powder

1.05 kg/kg content in the export product.

12

Circuit Breaker Assembly

Net to net.

13

Motor of Relevant Rating

Net to net.

C311

Three Phase Electrical Energy Meter

1 No.

1

Aluminium/ Aluminium Alloy Ingots/Sheets

1.05 kg/kg content in export.

2

Brake Magnet/ Bearing Magnet

Net to net.

3

Relevant Plastic/ Rubber Parts

Net to net.

4

MS Sheets/Coils/Strips

1.05 kg/kg content in export.

5

CRNGO Sheets/ Coils/Strips

1.25 kg/kg content in export.

6

Copper Winding Wire
OR
Copper Ingots/ Bars/ Rods (Electrolytic Grade)

1.01 kg/kg content in export

1.02 kg/kg content in export.

7

Bearing Assembly

Net to net.

8

Stainless Steel Rods/ Wire Rods/Bar/ Rounds

1.05 kg/kg content in export.

C312

Tin Plated HDHC Copper Bus Bar or Electrolytic Grade Tin Plated Copper Bus Bars or Tinned Copper Strips/ Flats

1 MT

1

Copper Wire Bars/ Ingots

1.05 MT

C313

Tinned Copper Terminal Ends

1 MT

1

Copper Scrap
OR


Copper Tube/ Copper Cathode/ Copper Wire Bar/ Billets

1.05 MT/MT of Copper content in export product

1.03 MT/MT content in the export product.

C314

Tinsel Conductor (Flat/Copper/Copper Alloy Conductors Spun with High Tenacity Polyester Filament Yarn)

1 kg

1

Copper Bars/Rods/Wires

1.03 kg/kg content in the export product

2

Polyester Filament Yarn of High Tenacity(Tenacity More than 7 gms. denier)

1.03 kg/kg content in the export product

C315

Totally enclosed fan cooled slip ring induction motors suitable for upto & including 660 V, 3 Phase, AC supply - 0 KW to 37 KW

1 No.

1

Cold Rolled Non-oriented (CRNO) electrical steel sheets/sheets in coil form

10.38 kgs/KW

2

Copper wire bars/cathodes/rods/winding wires/strips

1.56 kg/KW

3

Pig iron for housing
OR

5.86 kgs/KW

3

Commercial grade aluminium in ingot form (upto 99.5% purity) for housing

1.96 kgs/KW

4

EN-8 Alloy Steel for shaft

2.20 kgs/KW

5

Ball/Sleeve/Roller Bearings

2 Nos.(Net to net)

6

Composite insulation material consisting of paper, nylon, polyester, amide, nomex films

1.5% of FOB price

C316

Totally enclosed fan cooled slip ring induction motor suitable for upto & including 660 V, 3 Phase, AC supply - 37.5 KW to 75 KW

1 No.

1

Cold Rolled Non-oriented (CRNO) electrical steel sheets/sheets in coil form

8.76 kgs/KW

2

Copper wire bars/cathodes/rods/winding wires/strips

1.33 kg/KW

3

Pig iron for housing
OR

5.75 kgs/KW

3

Commercial grade aluminium in ingot form (upto 99.5% purity) for housing

1.92 kgs/KW

4

EN-8 Alloy Steel for shaft

1.91 kgs/KW

5

Ball/Sleeve/Roller Bearings

2 Nos.(Net to net)

6

Composite insulation material consisting of paper, nylon, polyester, amide, nomex films

1.5% of FOB price

C317

Totally enclosed Fan Cooled squirrel cage induction motor suitable for upto & including 660 V, 3 Phase, AC supply - 0 KW to 0.75 KW

1 No.

1

Cold Rolled Non-oriented (CRNO) electrical steel sheets/sheets in coil form
OR
Relevant Lamination/ Stampings core packs (1 No. of stator pack and 1 No. of rotor pack)

20.54 kgs/KW

1 set per motor

2

Copper wire bars/cathodes/rods/winding wires/strips

1.90 kg